Re: Will this panel/battery setup work for DC fence charger?

Originally Posted by
MO-NH
Solar panel: Coleman 18 watt amorphous solar panel with 7amp charge controller.
<snip>
I do have a spare regular sized 12 volt, 90 amp hour trolling motor battery that I could also use if a bigger battery is a must.
Welcome to the forum. My first solar fence charger system (back in the 80's) was for pigs. I ruined a few batteries back then, but that was when batteries were cheap and solar panels were expensive.
You will definitely need more panel, and maybe a bigger charge controller if you use the bigger battery. Can't say for sure without knowing what the fence charger draws. Your charge controller can handle a 100 watt panel. Your 90 AH battery needs at least a 65 watt panel just to get it charged. I would aim for the 100 watt panel because you don't know what the load is.
btw, an outdoor battery in northern NH, even in summer, really wants a charge controller with temperature compensation.
--vtMaps
4 x 235w Samsung, Outback fm60 & vfx3524 & mate, Midnite E-panel, four Interstate L16, Trimetric monitor, Honda eu2000
Bookmarks