Re: Charge Controller - Load Connection
The answer to your question is no. Please re-read Niel's response as he explains it well. Some rather low end controllers have a "load" terminal that might be used for a couple of lights or whatever, and are turned "on" under conditions determined by the controller manufacturer and possible customer settings, and should be explained in the owners manual. The more common thing is a LVD (Low battery Voltage Disconnect) connection, which is often how the so-called "load" output is configured to work.
Originally Posted by SolaRAC
1900 watts PV, (1000 watts PV feeding MX60; 900 watts PV + 160 watts micro hydro both feeding into a single shared Morningstar TS-MPPT-60) ; 2 SureSine 300; Xantrex Pure Sine 1800/12; six Rolls Surrette 2 volt L16 @ 12 volts.
Domestic hot water totally provided by the sun 8 months out of every year via thermal panel.