Search:

To get back to the original thread. Made sure the batteries where as charged as much as I could and well tank was fully pressurize. Lights went out Monday night and came on Friday. During this time I...

Just tested a very old Honeywell one. Stand by is about .033 amps.

They do make them in plastic.

Bird spikes !!!

http://www.nixalite.com/birdspikes.aspx

May try a RV dealership.

Geyser is double walled.

3680

Will need to know the length of the tubular support bar.

Min to Max tilt angles.

If I scale this out, guessing it should be 23" center to center of the bolts.



3642

I have this brand for my heating system:

http://www.amtrol.com/extrol.html

There is a sizing:

http://www.amtrol.com/support/extrol_com_sizing.html

The $ 100.00 ones maybe too light duty.

As for a controller, just need a on-off-on, momentary, center off, DPDT switch.

The holes where not that big. The 10' I had, had 1/4" size holes. Plus, on a dish, it had to move 150+ Deg. On a solar array, only need to move 50 Deg. so the mounting point can be moved farther out...

I just print everything at work.:blush:

I have blow the 4 fuses twice on my XP1100. Now keep 8 spares just in case.

I would look at a C Band Dish Actuator. The better ones are wind rated for 10-12 foot dishes. No more ladders/poles. Just flip a switch to move it in/out.

Bet he is using a MSW inverter.

Hate to be the code police, but...........................
1.- The negative wire(s) should have a white maker on them.
2.- This box will not pass NEC inspection, as the back-feed breakers must be...

I would add more insulation and put it on a timer. Have mine set to turn on about a hour before I need it.

Guess the 15 panels I have are not worth much now :cry:

"Coil" is an industry term used for the output of a control.

Just my 2 cents. Paid $ 2.64/gallon for propane last week.

It would be smart to also put a fuse inline with each panel. And some at the battery/inverter.