Search:

so basically im somewhere near at 19 amp,we get less sun here this time of year and weve had a lot of cloud over the recent weeks ,normally no genny required till end october but as we loose the...

yes i know what your saying,im not quiete a novice ,but my genny is a cheap chinese import after my expense meccaalt yanmar stopped producing after only 3 years and 2500 hours ,so by my reckoning i...

no i have that set for 50% battery ,i want to know the imput amps from the genny when it comes on ,i.e. at the present it is 16amps is this about right ,for a 6.0 kw genny or should i bump the ac...

i have a xantrex sw4548e invertor , a 7.2 kw (6.o constant) how many amps should i set the ac2 to as a back up,when batteries become low thanks in advance

hi Vic ,that made me laugh good english ,yep its in a silenced compartment ,so i think ill put a blower in there for a day or so and see how we go ,im learning fast on this solar game ,where abouts...

Hi thanks for all your help,my problem is im in spain ,and dont speak spanish so its a little difficult ,ive a feeling the rain did something to be honest ,im going to strip the cover of it tomorrow...

basically there are 2 capacitors on the top in the control box which go out to the plugs 3 x240 3 x110 all have trips on them ,this is a video i found on youtube...

hi my genny is is a pramac p11000 ,are u saying on the alternator the fuse may be ,or on the unit that generates the powr ,i cant see any fuse on the power unit

ok,where would the fuse be then ,so the abr on the alternator controls the whole generator even though it works of the fan belt ,im a bit nieve sorry about this stuf

argh .right im not that technical,im actualy in spain,my alternator blew some months ago and i had it rebuildt,would the alternator affect the output of the main unit then ,excuse my ignorance bbut...

hi my system has a back up generator ,that suddenly is only producing 2 to 4 volts ,i left the cover open and we had a heavy rainstrom ,all wiring seems to be in place and ok ,its a prmac p1100 10kva...

hi ive a xanterx SW4548E which i need to know the settings for in ac2,basically from my 10kw generator ,i have 16 115wp pv panels which i run through a tarom stecca 440/40a on factury settings ,i...

ive been *playing * with my system and ive noticed the on the solar regular(stecca tarom 440) that the nominal capicty is set at 100ah when my batteries are 420ah does this affect anything and as...

its the invertor that goes up to 53/54

hi its a xantrex sw4548e invertor with a pramac p11000 genny , and basically youve hit the nail on the head ,when solar drops and battery voltage goes down the invertor calls for more power via the...

yes the generator feeds the batteries whemn they drop below a certeian voltage throught he invertor ,the boiler is a gas ,and its circuit boards do nt accpet any thing other than 50-52 hz

hi when my generator comes on ,it is sending out current which locks onto the invertor at the correct votage ,but it shows on the invertor that it is at 54 hz instead of the normal 50hz,i have a...

i know your right but i want to learn about it a little more,went on that spanish site ,but my lack of knowledge of the language is a big hinderunce

thanks i have the manuals ,but im useless at all that techno babble its as clear as mud to me ,paul

thanks again,but being a novice how do i actually do that please ,paul