Go to the Northern Arizona Wind & Sun - Online Solar Store

Modding Prius for use as a power source

Digging in to the high voltage DC terminals, to make a tap for a HV inverter/UPS.

  1. Latest addition to the Prius/UPS family. There are several APC models which can be used without modification with a Prius.

  2. The floor and storage tray removed. Total time to get to this point, 3 1/2 minutes.

  3. The battery pack exposed. Total time to get to this point, 5 minutes and 2 bolts. After this point it gets harder - intentionally. The orange...

  4. A hidden bolt you have to track down to get inside, found near the left-rear door jam.

  5. Closeup of the safety disconnect.

  6. Overview of under the covers.

  7. Closeup of the high traction battery connection. White and black wires are my addition.

  8. 1430 watt load, battery amps/volts shown here.

  9. The tap is stored in the left-rear storage compartment.
Showing pictures 1 to 9 of 9