
Categories Widget (Show All)
Recent Articles
Recent Forum PostsJust an FYI - HEREs the crimp tool I bought on ebay. It works well.
And you do not want to draw off more than 50% of the batteries power ie keep above 50% DoD, depth of discharge, nor go below 50% SoC, state of charge.
My spring water comes into my basement by gravity. I pump it with a 115 v AC Shurflo pump to a plastic 30 gallon barrel in my attic. That tank provides
I have been busy lately but finally got some time with the generator. It is mounted about 15 feet above ground to the center of the hub. Just a 2"

Just an FYI. There is a pretty active microhydro Yahoo group that has some pretty knowledgable folks. Some of which may have experience sizing battery
Re: Battery Sizing and Charging Considerations for a Hydro System
mtdoc June 19th, 2013, 18:03 PDT